Product Description
AVAILABLE FOR SALE IS A CISCO IR829GW-LTE-VZ-AK9 VERIZON 829 INDUSTRIAL INTEGRATED SERVICES ROUTER. THIS PRODUCT IS SEALED IN THE ORIGINAL PACKAGING. PRODUCT MIGHT NOT BE IN RETAIL CONDITION, AND THE BOX MIGHT HAVE BEEN DAMAGED DUE TO STORAGE AND HANDLING.MAKE: CISCO
MODEL: IR829GW-LTE-VZ-AK9
Cellular Connectivity (LTE-VZ Model)
Carrier: Verizon Wireless (US)
Generation: 4G LTE
Supported LTE Bands:
Band 13 (700 MHz)
Band 4 AWS (1700/2100 MHz)
Band 25 extended PCS (1900 MHz)
Backward Compatibility: EVDO Rev A / CDMA 1x (BC0, BC1, BC10)
LTE Category: Cat 3 (Release 9)
Theoretical Speeds: Up to 100 Mbps downlink, 50 Mbps uplink (Actual speeds depend on network conditions)
Modem Processor: Qualcomm MDM9615
SIM Slots: Dual Mini-SIM slots (2FF) for redundancy or multiple profiles.
Antennas: Requires external cellular antennas (TNC connectors typically).
Wi-Fi Connectivity (W Model)
Standard: IEEE 802.11a/b/g/n (Wi-Fi 4)
Frequency Bands: Dual-Band (2.4 GHz and 5 GHz), concurrent operation.
MIMO: 2x2 MIMO with two spatial streams on each band (2.4 GHz & 5 GHz).
Maximum Data Rate: Up to 300 Mbps per radio (theoretical).
Features: Maximal Ratio Combining (MRC), Legacy Beamforming, 20/40 MHz channels, Packet Aggregation (A-MPDU, A-MSDU Tx/Rx), Dynamic Frequency Selection (DFS), Cyclic Shift Diversity (CSD).
Modes: Supports Autonomous mode (standalone AP) and Universal/Unified mode (for use with Cisco Wireless LAN Controllers).
Security: WPA/WPA2/WPA3 (depending on IOS version).
Antennas: Requires 4 external dual-band Wi-Fi antennas (TNC connectors typically, 2 for 2.4GHz, 2 for 5GHz based on diagrams).
GPS Connectivity (G Model)
Type: Integrated standalone GPS receiver.
Features: Enables real-time location tracking and geo-fencing capabilities (often used with management software like Cisco IoT FND).
Antenna: Requires an external active GPS antenna connected via a dedicated SMA port.
Interfaces
WAN Ports:
1 x Gigabit Ethernet (10/100/1000 Mbps) RJ-45 port
1 x SFP (Small Form-Factor Pluggable) port (Supports Fiber or Copper Gigabit/Fast Ethernet modules). Note: Typically, the RJ-45 and SFP WAN ports operate in a combo fashion, where only one can be active at a time.
LAN Ports:
4 x Gigabit Ethernet (10/100/1000 Mbps) RJ-45 ports (Integrated Switch).
Supports IEEE 802.1Q VLANs (up to 16).
Optional PoE/PoE+ (Power over Ethernet): Provides a shared budget of 30W across the 4 LAN ports to power connected devices like IP cameras or phones.
Serial Ports:
1 x RS-232 (DTE)
1 x RS-232/RS-485 (DCE, configurable)
Supports asynchronous modes.
Console Port: 1 x Mini Type-B USB for CLI access and diagnostics.
USB Port: 1 x USB 2.0 Type A port.
Memory & Storage
DRAM: 2 GB (Default and maximum)
Flash Memory: 8 GB eMMC (approx. 4 GB usable for configuration, OS images, etc.)
Software and Features
Operating System: Cisco IOS (often ships with Advanced IP Services feature set)
Routing: RIPv1/v2, OSPF, EIGRP, BGP, Policy-Based Routing (PBR), GRE/mGRE, IPv4, IPv6, Multicast, HSRP, VRRP, Multi-VRF.
Switching: VLANs (up to 16), MAC Filtering, Spanning Tree (802.1D).
VPN & Security: Hardware-accelerated IPsec VPN (DES, 3DES, AES), SSL VPN, DMVPN, FlexVPN, GETVPN, Zone-Based Firewall, Intrusion Prevention System (IPS), 802.1X, PKI support, MAC address filtering.
Quality of Service (QoS): LLQ, WFQ, CBWFQ, Class/Policy marking.
Management: CLI (Console, SSH, Telnet), SNMPv3, HTTP/HTTPS Web GUI, Cisco IoT Field Network Director (FND), Cisco Configuration Professional/Express, IOx application hosting environment.
Industrial Protocols: Raw Socket TCP/UDP, SLIP, SCADA protocol translation (DNP3, T101-104 via IOx).
Other: Accelerometer & Gyroscope, Mobile IP, DHCP Server/Client, NAT, DNS, DDNS.
Power Specifications
Input Voltage: 9 to 32 VDC (Integrated wide-range DC power supply).
Power Consumption:
Maximum 40 Watts (without using PoE).
Maximum 70 Watts (when providing PoE power).
Other Details
Before requesting a return, please contact us, as we can often times troubleshoot problems through email. All returns must include all original items in the same condition they were sent. We will also issue an RMA number which must be present on the exterior of the returned box. Your return will not be processed without your RMA number on the box. The buyer is responsible for all return shipping charges.We are not responsible for any technical specifications, compatibility, fitment, application issues, buyer’s remorse, or if an item was purchased by mistake. Any return or refund requested for these reasons will be charged a 20% restocking fee.
We offer the following return guidelines for the products we have available:
New other – All of our new product falls into this category since manufacturer packaging has usually been opened or is otherwise not in retail condition. We offer a full refund of the purchase price less shipping charges for “New other” products that are not in working condition for up to 30 days after receipt.
Seller refurbished – Our refurbished items have been tested and verified by our in-house staff and we guarantee the tested components for 30 days after receipt. We will refund the purchase price less shipping charges for “Seller refurbished” products that are not in working condition when received.
Used – All used products carry a 30 day non-DOA warranty. These products may not be 100% functional and only basic power on capabilities are guaranteed. If a “used” product is received and will not power on, we will issue a full refund less shipping charges. Partial refunds will not be issued for non-working components, and a 20% restocking fee will be charged to all returns of product that do power on.
For parts or not working – There are no warranties or return options available for merchandise that is listed as “for parts or not working”. All returns will be processed with a 20% restocking fee.
