Product Description
Cisco Catalyst 2960-X 24 GigE PoE 370W, 4 x 1G SFP, LAN Base Switch Condition: Refurbished and restored to factory settings. Expect minor scratches or cosmetic dents from previous use. Details: Fully tested, cleaned, and reset using PuTTY console. Factory default settings restored; startup configurations and NVRAM wiped via the write erase command. All ports tested and inspected for functionality and physical integrity. Units monitored for any issues during testing, with details disclosed if applicable. Note: Photos represent typical product condition..
Model Number: WS-C2960X-24PS-L
Ports & Interfaces
Downlink Ports: 24 x 10/100/1000 Gigabit Ethernet ports
Uplink Ports: 4 x 1 Gigabit Ethernet SFP (Small Form-Factor Pluggable) ports
Console Ports:
1 x USB Mini-B
1 x RJ-45 Ethernet
Management Port: 1 x RJ-45 10/100 Ethernet management port
USB Port: 1 x USB Type A (for storage/file transfer)
Stacking Ports: Requires optional FlexStack-Plus module (C2960X-STACK)
Power over Ethernet (PoE)
PoE Standard: PoE+ (IEEE 802.3at)
PoE Ports: All 24 downlink ports support PoE/PoE+
Total Available PoE Power: 370W
Can power up to 24 ports at 15.4W (PoE) simultaneously.
Can power up to 12 ports at 30W (PoE+) simultaneously.
Performance
Switching Bandwidth: 216 Gbps
Forwarding Bandwidth: 108 Gbps
Forwarding Rate: 71.4 Mpps (Million packets per second, 64-byte packets)
Stacking Bandwidth: 80 Gbps (with optional FlexStack-Plus module)
Hardware & Memory
RAM: 512 MB
Flash Memory: 128 MB
CPU: APM86392 600MHz dual core
Stacking
Technology: Cisco FlexStack-Plus (Requires optional C2960X-STACK stacking module and cables)
Maximum Stack Members: 8 switches (2960-X LAN Base only)
Stack Bandwidth: 80 Gbps
Layer 2 Features
MAC Address Table Size: 16,000 entries
VLANs: Up to 1,023 simultaneous VLANs (supports 4096 IDs)
Protocols: IEEE 802.1D Spanning Tree, PVST+, RSTP (802.1w), MSTP (802.1s), PortFast, UplinkFast, BPDU Guard, Root Guard, LACP (802.3ad), PAgP, LLDP (802.1ab), CDPv2, VTPv2, DTP, Jumbo Frames (up to 9216 bytes), Voice VLAN.
Layer 3 Features (LAN Base Software)
Routing: Supports Static routing for up to 16 routes. Note: This is primarily a Layer 2 switch; dynamic routing requires IP Lite on 2960-XR models.
Management & Security
Management: CLI (via Console, Telnet, SSH), SNMP v1/v2c/v3, RMON, Web UI (via Cisco Configuration Professional/Network Assistant), Cisco Prime Infrastructure, Cisco Network Plug and Play (PnP), Bluetooth (for over-the-air access with dongle).
Security: Port Security, DHCP Snooping, Dynamic ARP Inspection (DAI), IP Source Guard, Private VLAN Edge, Storm Control (Unicast, Multicast, Broadcast), ACLs (Port-based, VLAN-based - MAC/IPv4/IPv6), IEEE 802.1X Authentication (including MAC-Auth Bypass, Guest VLAN, VLAN Assignment), TACACS+, RADIUS, Secure Shell (SSH v2), SSL.
Quality of Service (QoS): 8 egress queues per port, Weighted Tail Drop (WTD), Class of Service (CoS) Prioritization (802.1p), Differentiated Services Code Point (DSCP) marking, Policing, Shaping, Auto-QoS.
Power & Physical
Power Supply: Internal, fixed AC power supply.
Redundant Power: External Redundant Power System (RPS) support via RPS Connector (compatible with PWR-RPS2300).
Form Factor: 1U Rack-mountable, Desktop
Other Details
Before requesting a return, please contact us, as we can often times troubleshoot problems through email. All returns must include all original items in the same condition they were sent. We will also issue an RMA number which must be present on the exterior of the returned box. Your return will not be processed without your RMA number on the box. The buyer is responsible for all return shipping charges.We are not responsible for any technical specifications, compatibility, fitment, application issues, buyer’s remorse, or if an item was purchased by mistake. Any return or refund requested for these reasons will be charged a 20% restocking fee.
We offer the following return guidelines for the products we have available:
New other – All of our new product falls into this category since manufacturer packaging has usually been opened or is otherwise not in retail condition. We offer a full refund of the purchase price less shipping charges for “New other” products that are not in working condition for up to 30 days after receipt.
Seller refurbished – Our refurbished items have been tested and verified by our in-house staff and we guarantee the tested components for 30 days after receipt. We will refund the purchase price less shipping charges for “Seller refurbished” products that are not in working condition when received.
Used – All used products carry a 30 day non-DOA warranty. These products may not be 100% functional and only basic power on capabilities are guaranteed. If a “used” product is received and will not power on, we will issue a full refund less shipping charges. Partial refunds will not be issued for non-working components, and a 20% restocking fee will be charged to all returns of product that do power on.
For parts or not working – There are no warranties or return options available for merchandise that is listed as “for parts or not working”. All returns will be processed with a 20% restocking fee.
