Product Description
AVAILABLE FOR SALE IS A CISCO WS-C2960G-48TC-L . THIS PRODUCT IS SELLER REFURBISHED . THE PRODUCT HAS BEEN TESTED, WIPED AND RESTORED TO FACTORY SETTINGS. CUSTOMERS SHOULD EXPECT TO SEE SCRATCHES OR COSMETIC DENTS FROM PRIOR USE PRESENT ON THE UNITS. PHOTOGRAPHS ARE REPRESENTITIVE OF THE OVERALL CONDITION OF THIS PRODUCT LINE. THESE PRODUCTS WERE WIPED OF ALL FILES USING PuTTy CONSOLE. ALL FILES THAT WERE LEFT FROM PRIOR USE, INCLUDING BUT NOT LIMITED TO THE VLAN.DAT, ANY PREVIOUS UPDATE VERSIONS, USER NAME AND PASSWORDS, Etc. WERE REMOVED. THE STARTUP CONFIGURATION WAS REPLACED WITH THE FACTORY DEFAULT SETTINGS AND THE NVRAM WAS WIPED USING THE WRITE ERASE COMMAND. WE HAVE RUN TESTS ON ALL PORTS (WHERE APPLICABLE) ON THE UNIT, AS WELL AS PHYSICALLY INSPECTED THEM FOR DAMAGE. EACH UNIT WAS CAREFULLY MONITORED FOR ANY FAILS DURING THE AUTOMATIC TESTING. ANY PROBLEMS ENCOUNTERED WILL BE REPORTED ON THE LISTING.MAKE: CISCO
MODEL: WS-C2960G-48TC-L
Ports & Interfaces
Downlink Ports: 44 x 10/100/1000 Gigabit Ethernet Base-T ports (RJ-45 connectors)
Uplink Ports: 4 x Dual-Purpose Uplink ports.
One (1) 10/100/1000 Gigabit Ethernet Base-T port (RJ-45)
One (1) SFP (Small Form-Factor Pluggable) slot (for Gigabit fiber or copper modules)
Note: On each dual-purpose port, only one interface (either the RJ-45 or the SFP) can be active at a time.
Console Port: 1 x RJ-45 Serial Console
Power over Ethernet (PoE)
PoE Support: None. This model (WS-C2960G-48TC-L) does not provide PoE capabilities.
Performance
Switching Capacity (Backplane): 32 Gbps
Forwarding Rate: 39 Mpps (Million packets per second, 64-byte packets)
Hardware & Memory
DRAM: 64 MB
Flash Memory: 32 MB
Stacking
Stacking Support: None. The original Cisco Catalyst 2960 and 2960G series switches do not support stacking technologies like FlexStack.
Layer 2 Features
MAC Address Table Size: 8,000 entries
VLANs: Up to 255 active VLANs (supports 4096 IDs)
Protocols: IEEE 802.1D Spanning Tree, PVST+, RSTP (802.1w), MSTP (802.1s), 802.1Q Trunking, VTPv2, CDP, LACP (802.3ad), PAgP, IGMP Snooping v1/v2/v3, Voice VLAN, Unicast/Multicast/Broadcast Storm Control.
Jumbo Frames: Supported (up to 9018 bytes)
Layer 3 Features (LAN Base Software)
Routing: None. This switch operates purely at Layer 2.
Management & Security
Management: CLI (Console, Telnet, SSH), SNMP v1/v2c/v3, RMON, Web-based management (via Cisco Network Assistant or embedded device manager), SPAN, RSPAN, TFTP, BOOTP.
Security: Port Security, DHCP Snooping, Dynamic ARP Inspection (DAI), IP Source Guard, Private VLAN Edge, ACLs (L2-L4 MAC/IP based), IEEE 802.1X Authentication, RADIUS, TACACS+, Secure Shell (SSH).
Quality of Service (QoS): Classification (CoS 802.1p, DSCP), 4 egress queues per port, Weighted Round Robin (WRR) scheduling, Policing, Auto-QoS.
Power & Physical
Power Supply: Internal, fixed AC power supply.
Redundant Power: External Redundant Power System (RPS) support (likely Cisco RPS 675).
Form Factor: 1U Rack-mountable
Other Details
Before requesting a return, please contact us, as we can often times troubleshoot problems through email. All returns must include all original items in the same condition they were sent. We will also issue an RMA number which must be present on the exterior of the returned box. Your return will not be processed without your RMA number on the box. The buyer is responsible for all return shipping charges.We are not responsible for any technical specifications, compatibility, fitment, application issues, buyer’s remorse, or if an item was purchased by mistake. Any return or refund requested for these reasons will be charged a 20% restocking fee.
We offer the following return guidelines for the products we have available:
New other – All of our new product falls into this category since manufacturer packaging has usually been opened or is otherwise not in retail condition. We offer a full refund of the purchase price less shipping charges for “New other” products that are not in working condition for up to 30 days after receipt.
Seller refurbished – Our refurbished items have been tested and verified by our in-house staff and we guarantee the tested components for 30 days after receipt. We will refund the purchase price less shipping charges for “Seller refurbished” products that are not in working condition when received.
Used – All used products carry a 30 day non-DOA warranty. These products may not be 100% functional and only basic power on capabilities are guaranteed. If a “used” product is received and will not power on, we will issue a full refund less shipping charges. Partial refunds will not be issued for non-working components, and a 20% restocking fee will be charged to all returns of product that do power on.
For parts or not working – There are no warranties or return options available for merchandise that is listed as “for parts or not working”. All returns will be processed with a 20% restocking fee.
